irishminis.ie

Well this is my new project for next year. Some of you will know the plans for it but for those that don't and this wont be one for purist's

This was given to me as a 22 birthday present and i was unsure of what to do with it the wheels started rolling in my head and plans begin to happen for it

Some of the specs and parts that i already have for it

1968 hornet shell
New floors in the front
New sills inner and outer both sides
2 new wings
New front panel
A panels both sides
Doors rebuilt
Boot floor repair
rear arches repaired
Heel board repair both sides
Side window panels under the window both sides
Scuttle repair on drivers side
Inner hinge repair panel both sides
Bonnet repaired
Boot lid repaired and modified
Deseamed bumpers front and rear
Custom bootlid for L.E.D number plate light
Recaro front seats with back seats trimmed to match and door panels the same
Full bolt in roll cage from Rollcentre in the uk
KAD 7.9 vented discs and billet calipers
wilwood master cylinder
Spax shocks
Loads of billet stuff from DSN
(Subframe mounts for the rear
Shock mounts
Door hinges
Bonnet risers
And few other bits)
Fully adjustable bottom arms and tie rods
Camber brackets for the rear

Next was to decide on a engine for it

And only one engine came to mind and that was a Honda B16 conversion

B16a engine
S4c limo gear box
Stainless manifold
Apaxi airfilter
Light weight flywheel
exedy stage 1 clutch

KJB fabrication vtec subframe

Ill try my best to get this updated but for updates as the happen check out minifix on facebook

https://www.facebook.com/pages/Minifix/ ... =bookmarks


Now time for some pictures



















































































Thats all for now

Really cool. She was in quare shape when you got her.

Looking forward to seeing this finished James, something very different

well some more updates on my vtec build

trying on the exhaust before i cut it to get it to fit















Manifold all ground down and ready to be chopped








The exhaust manifold is going to be one tight manifold



My honda S2000 clocks for my build



Apexi Power Fc ECU with commander

Some more parts coming in slowly.

Got a new alloy rad
Slim line fan
Apexi air filter
NGK plug leads
Skunk2 inlet manifold
Inlet manifold gasket
Full EK4 wiring loom





Hope to get some more done tomorrow like rad mounted and inlet fitted

What car are them recaros out of ?

There out a lancer GSR. they are going up for sale as i want bride seats for it instead

How much was the KJB subframe? Did it come with bottom arms/mounts/shafts???

_________________
If it's bigger than a mini it's not a mini

KJB frame was 650 euro as i got it here but it works out that from KJB themselfs but since he has stopped making them

No bottom arms but they use mini stuff and no shafts with it either but all speed ones will work

Got my rad in yesterday but not made up a bracket yet have to sit down and design one to suit my build.





I hope to get my manifold welded tomorrow and my intake ready to be welded tomorrow or thursday

My silcone hose kit turned up yesterday and got cracking on working out my pipes for my rad and clearances for everything else around it and fitted my fan to

Also fitted a new dizzy cap and rotor arm to




http://s181.photobucket.com/user/djclub ... g.html?o=1
http://s181.photobucket.com/user/djclub ... g.html?o=0

Well abit of a update

Minisport order arrived

New top arms both sides
New hubs with new bearing and ball joints both sides
competion bottom shock mounts
Brand new back plates with mintex shoes fully built up
Brand new alloy super fins
Brand new 7.9 inch grooved and vented discs







Mini spares order

brand new back subframe
top arm pins
few odds and ends like washers and screws






KAD brakes all built up with new CVs just getting ready to be fitted



Drivers side built up with Delta mini from japan springs and lowered Spax shocks and new track rod ends



Passenger side built up aswell



My DSN billet shock top mounts in blue



THen i hit a little problem my back subframe was welded out of alignment so has to be sent back on monday to get it sorted


Thats all for the min but i will update it when it comes back and has some wheels on it hopefully by the end of next week it should be rolling

Wow I'd say that order set you back a fair few quid. Top work mate.

it will be basically a new car benny when it is done so what has to be ordered will be ordered. sure it is only money at the end of the day

Dead right, I like your attitude.

Well a big up date

Heel board all fixed and rear subframe fitted today after it only came back on monday

Rear subframe fitted
radius arms are fitted
new back plates fitted
Superfin drums fitted
rear shocks fitted

Also got my driveshafts from Rob in Allspeed and don't they look great



Wheels fitted to make it roll

Cage mocked up and bride brix seat mocked up and rolled it out side for some pics


























Also mocked up my rocket bunny rear wing






Thats all for now

Hope to get a start on the loom next week and get my clocks mounted in the dash i have coming from ABS motorsport

Also waiting on my inlet to come from getting modified and welded

spoiler gives her a bit of a Jap look.

you go with Gizmo for the welding of the manifold?

I got AandD Fabrications to do it for me at the back of st margrets

2 years without an update?! This ever get finished James?

_________________

Pretty much on the back burner for the min. as my other 87 city took priority over this but here will hopefully be a update in the summer on it